KVANT BeamBrush 10

KVANT BeamBrush 10

RGB合計10Wレーザー,Pangolin FB4コントローラーを内蔵しLANケーブル接続。 新機構BeamBrushで0~100%可変でビームに拡散をかけられるのでシチュエーションに応じてオーディエンスへのスキャン、カメラへの照射も可能とする (注意:メーカー推奨ではありません)

仕様

Source | Type: semiconductor diode | full-colour RGB laser projector
Suitability: laser graphics displays | indoor aerial beam shows | audience scanning shows [ONLY when ALL safety criteria are fulfilled]
System control: Pangolin FB4 – Ethernet, ArtNet, DMX, ILDA | PC, Lighting Console, Autoplay
Compliant with: EN 60825-1 [tested by TÜV SÜD], FDA
Ingress protection rating IP20
Weight [kg]: 13
Size [WxHxD, mm]: 339 x 353 x 270
Guaranteed opt. output [mW]: 9700mw | 9.7W
R | G | B [mW]: 2500 | 2800 | 4500
電Wavelengths [nm, ±5nm]: 637 | 520 | 445
Beam size [mm]: 4.5 x 4.5
Beam divergence [mrad]: <0.9 mrad | applies when BeamBrush is not active
Modulation [kHz] | type: 100 | Analog
X-Y scanners:
ScannerMAX 506 Compact, 40 Kpps@8°, max. scanning angle 60° on both axes
Power requirements [V] | Input: 100-230/50-60Hz
Max. power consumption [VA]: 340
Operation temperature [°C]: 10-40C